Weld Bead Processor Brush Type Weld Cleaning Machine Spot Welding Equipment with Intelligent Adjustment, Digital Display Welding Spot Cleaner for Metal Arc La-ser

▶▶Do you want to process welding marks faster and better? ▶▶With this stainless steel weld cleaning machine, you don't have to worry about those difficult-to-clean welds. ▶▶Come and experience it, it will give you a unique cleaning experience.Specification-Material: Metal, Plastic and Hardware-Process: Polishing-Input Voltage: 110V/220V-Output Voltage: 0-34V-Power: 1000W-Frequency Adjustment Range: 0-34Hz-Brush Hair Length: 70mm/2.76inch-Product Size: 32*15.2*26cm/12.6*5.98*10.24inchPacking list-Weld Cleaning Machine-300cm ground wire clamp-Brush-M6 copper head-Carbon fiber cloth-Soft cloth-Instruction manualHow to Use●Plug the power supply into AC110V, connect the gun to the corresponding terminal, plug in the control line, turn on the power switch, then the power indicator (i.e. red light) is on. ●Stick the processing gun with the processing liquid, press the microswitch, and wipe against the black weld bead. ●After treatment, wipe with a damp cloth or water for better resultsNotes●Wear a mask, goggles and gloves to use this machine, to prevent the treatment liquid from spraying into human eyes.●Please do not switch the machine panel to connect the workpiece and the processing gun line.●The gun must be wrapped with processing cloth when using the copper head.●Products must be used with cleaning agents (not included).●Only need to replace the bristles, stainless steel head can be reused.

• ▶【Strong Power】This spot welding cleaner with a power of 1000W, can runs stably so that the output voltage can reach 0-34V. You just need to manipulate it to scrub back and forth on the weld a few times, and the oxidized black spots will be removed immediately.
• ▶【High Efficiency】The copper head of this weld bead processor is oxidation-resistant, which greatly improves cleaning performance. In addition, the IGBT power tubes greatly increase cleaner occupancy, improving efficiency and longevity. The intelligent short-circuit protection function improves the safety of use.
• ▶【Save Effort & Low Cost】You need to use it to scrub back and forth on the weld several times, and the oxidation black spot will be cleaned immediately. It flexibly removes small gaps and hard-to-touch places, and avoids manual polishing.It takes less time, is faster and has a better cleaning effect than traditional grinding.
• ▶【Intelligent Adjustment】Equipped with a digital display, it is easy for operators to monitor and manage the data at any time. You can also compensate for unstable voltage with intelligent and frequency adjustment (0-34Hz), which automatically recognizes high and low voltage to clean yellow spots, black spots and solder joints of different degrees.
• ▶【Wide Application】Perfect for metal, arc, laser, etc. Our weld cleaning machine can be used for metal parts of various materials and shapes, such as automobiles, airplanes, ships and other vehicles, and can also be used to clean yellow spots, black spots, markings, etc. left by materials in industrial processes.